Controls (BRI)

  • BRI823-B-D

    Installed PIR Bi-Level Dimming Sensor with Photocell

    • The BRI823-B-D sensor mounts has a slim, low-profile designed for installation inside the bottom of an LED luminaire’s body to provide multi-level control based on motion and/or daylight.
    • Its polycarbonate housing is flame retardant, UV resistant, and impact resistant.
    • It controls 0-1OV LED drivers, and is rated for wet and cold locations. All control parameters are adjustable using the RC-100 Remote Controller to store and transmit sensor profiles.
    • Includes two (2) PIR Lens for low bay (Low Mode) up to 25-FT, or high bay mounting heights (High Mode) up to 40-FT.
    • Provides line voltage On/Off switching and 0-1OV dimming control.
    • Time delay setting options from 5 to 30 minutes, with optional disable delay.
    • Adjustable ramp up and fade down times
    • Optional daylighting setpoints feature automatic calibration or manual adjustment.
    • Use optional RC100 Remote Controller Program to select and automate settings for brightness, sensitivity, hold time, standby-time, daylight sensor, and standby-dimming.
    • Suitable for commercial and industrial locations: parking, warehouses, gymnasiums, manufacturing, production, factories, gas stations, and pedestrian pathways.
  • RC-100 Remote

    Remote Controller to Program BRI823 Sensor

    • The RC100 Remote Controller can store up to four (4) sensor parameter modes to speed configuration of multiple BRI823 Sensors installed in luminaires.
    • It uses bidirectional infrared communication to send and receive sensor settings with a maximum mounting height of 50 feet.
    • The device can display previously established sensor parameters, copy parameters and send new parameters, or store parameter profiles.
    • For projects where identical settings may be desired across a large number of areas or spaces, this capability provides a streamlined method of configuration. Settings can be copied throughout a site, or in different sites.
    • Program and automate settings for brightness, sensitivity, hold time, standy-by-time, daylight sensor, and stand-by-dimming.
    • Uses two (2) AAA 1.5V alkaline batteries.

Main Menu