36Products found
Filter

  • Leviton HB011-PDX

    LEVITON™ PIR Fixture Mount, Dimming Sensor with Daylight Harvesting (120-347V)

    • High Bay Fixture Mount Occupancy Sensor lighting control with Daylight Harvesting– PIR technology.
    • Single relay with one (1-10V sinking current) control line for use to connect directly to low voltage control ballast.
    • Fixture Mount Passive Infrared High /Low Bay Occupancy Sensor, Time Delay: 30 seconds to 30 minutes.
    • Includes Two (2) interchangeable, adjustable 360° lenses: High Bay Lens provides 1.5:1 spacing to mounting height coverage for 21 to 40 feet, and Low Bay Lens provides 2:1 spacing to mounting height coverage for 13 to 20 feet, 120-230-277 or 347V.
    • 1-100% continuous dimming control specifically designed for LED fixture control.
    • Suitable for use in standard and cold storage applications.
    • Visual RGB LED indicators for device status and troubleshooting.
    • Alternating relay software for increased lamp life.
    • Meets energy code requirements for ASHRAE 90.1 and Title 24 for electronic ballast loads 120/277V.

    SPEC SHEET | MORE FILES

  • Leviton HB0LA-PDX

    LEVITON™ PIR Fixture Mount Dimming Sensor with Daylight Harvesting with Snap Lock Offset Adapter (120-347V)

    • Includes an assembly of an OSFLO-W short length snap lock adaptor and an HB011-PDX, High Bay Fixture Mount Occupancy Sensor lighting control with Daylight Harvesting PIR technology, Single relay with one (1-10VDC sinking current) control line for use to connect directly to low voltage control ballast.
    • Fixture Mount Passive Infrared High/Low Bay Occupancy Sensor, Time Delay: 30s-30m, (2) interchangeable, adjustable 360° lenses, the high bay PIR lens provides 1.5:1 spacing to mounting height coverage for 21-40 ft, the low bay lens provides 2:1 spacing to mounting height coverage for 13-20 ft, 120-230-277 or 347VAC
    • 1-100% continuous dimming control specifically designed for LED fixture control.
    • Suitable for use in standard and cold storage applications.
    • Visual RGB LED indicators for device status and troubleshooting.
    • Alternating relay software for increased lamp life.
    • Meets energy code requirements for ASHRAE 90.1 and Title 24 for electronic ballast loads 120/277V

    SPEC SHEET | MORE FILES

  • Leviton OSFLO-W

    LEVITON™ Snap-Lock Offset Adapter For OSHFU Sensor

    • Short length offset adapter for use with OSFHU occupancy sensors.
    • To improve the field-of-view for deep body fixtures, a separate offset adapter accessory (OSFOA-00W) can be used to position the sensor below the fixture body.

  • Leviton OSFHW-CTW

    LEVITON™ PIR Fixture Mount Occupancy Sensor for Wet Location and Outdoor LED High Bays (120-347V)

    • The OSFHW-CTW is a fixture mounted PIR LED High Bay Occupancy Sensor suitable for Wet Locations
    • Includes a 7.5 inch wire lead length and interchangeable adjustable 360 degree low-bay (8FT-20FT), and high-bay (20FT-40FT) lenses, blue, aisle mask.
    • Ideal for damp or wet locations such as supermarket meat departments, food processing plants, parking garages and other wash down, high ceiling applications.
    • The OSFHW features a IP65 rating for indoor and outdoor locations and is designed to withstand dust and pressure washers.
    • The sensor includes two interchangeable lenses for use in either a 360 degree High-Bay or 360 degree Low-Bay general area and includes an aisle mask accessory.

    SPEC SHEET | MORE FILES

  • Leviton OSFHL-CTW [with Arm Mount]

    Fixture Mount PIR Occupancy Sensor + Arm Mount For Wet Location and Outdoor LED High Bays, 120-347V

    • The OSFHW-CTW is a fixture mounted PIR LED High Bay Occupancy Sensor suitable for Wet Locations
    • Includes a 7.5 inch wire lead length and interchangeable adjustable 360 degree low-bay (8FT-20FT), and high-bay (20FT-40FT) lenses, blue, aisle mask.
    • Ideal for damp or wet locations such as supermarket meat departments, food processing plants, parking garages and other wash down, high ceiling applications.
    • The OSFHW features a IP65 rating for indoor and outdoor locations and is designed to withstand dust and pressure washers.
    • The sensor includes two interchangeable lenses for use in either a 360 degree High-Bay or 360 degree Low-Bay general area and includes an aisle mask accessory.

    SPEC SHEET | MORE FILES

  • Sold Out

    PhotocellBK

    Twist-Lock Photocell Sensor, Black Cap

    • Smart Sensor Photocell Cap in semi-transparent black for M Gen2 Series LED Area Lights.
  • Sold Out

    Bi-Level + Photocell-B

    Twist-Lock PIR Bi-Level Dimming and Photocell Sensor, Black Cap

    • Smart Sensor Bi-Level Dimming and Photocell Cap in semi-transparent black for M Gen2 Series LED Area Lights.
  • Sold Out

    Bi-Level + Photocell-W

    Twist-Lock PIR Bi-Level Dimming and Daylight Sensor, White Cap

    • Smart Sensor Bi-Level Dimming and Daylight Cap in semi-transparent white for NSF Rated Gen2 Series LED UFO High Bays.
  • Sold Out

    HD406VRH-C

    Microwave Occupancy Sensor Fixture Mount with Bracket

    • Microwave Occupancy Sensor for HG, HLO UFO, HLO PC UFO, and Omni UFO Series LED UFO High Bays.
  • Sold Out

    HD406VRH-C Dimming

    Microwave Dimming and Occupancy Sensor Fixture Mount with Bracket

    • Microwave Dimming and Occupancy Sensor for HG, HLO UFO, HLO PC UFO, and Omni UFO Series LED UFO High Bays.

  • HD03R Remote

    Remote Controller to Program Sensor

    • Smart Sensor Remote Controller for LED Area Lights and LED UFO High Bays.
  • Sold Out

    HD05R Remote

    Remote Controller with On-Screen LCD Display to Program Sensor

    • Smart Sensor with LCD Display Remote Controller for LED Area Lights and LED UFO High Bays.
  • Sold Out

    MC601V Dimming

    Installed Microwave Bi-Level Dimming Sensor with Photocell, IP20 Dry Location,120-277V

    • Integrated PIR Bi-level Dimming and Photocell Sensor for Troffer Luminaires and Troffer Retrofit Kits.
  • Sold Out

    Twist-Lock Light Sensor – Black

    Photocell Sensor, Twist-Lock Type, Automatic Daylight On/Off

    • On/Off Photocell Sensor for MAL Series LED Area Lights.
  • Sold Out

    Twist-Lock Light Sensor – Blue

    Photocell Sensor, Twist-Lock Type, Automatic Daylight On/Off

    • On/Off Photocell Sensor for HG Gen2 Series LED Area Lights.
  • Sold Out

    MS-PUNVC01 Photocell (100-277V)

    Button Photocell Sensor, Max Load 750W, (120-277V) Available as an installed option.

    • The MS-PUNVC01 Photocell Sensor is a wired-in button design, 100-277V, 50/60 Hz.
    • It has a maximum working load of 750W.
    • It is suitable for enclosed outdoor LED luminaires in dry and damp locations, <99% RH.
    • The optional sensor is installed into the applicable luminaire with each order.

Main Menu