Leviton (120-347V)

5Products found

  • OSFHU-ITW

    LEVITON™ PIR Fixture Mount Occupancy Sensor (120-347V)

    • High-Bay Fixture Mount Occupancy Sensor lighting control, Interchangeable Adjustable 360° Low Bay and (8′-20′), High Bay (20′-40′) Lenses, Aisle Mask, Passive Infrared Technology, 120/208/220/230/240/277/347V; 50/60Hz.
    • Quick-snap threaded nipple, Instant Start-up, Return-to-last state after power outage, Auto-Sensitivity gain from temperature increase, False-detection protection, Super Bright Green LED.
    • The OSFHU high-bay occupancy sensor is specifically designed for high mounted areas such as warehouses, manufacturing and other high ceiling applications.
    • It is a self-contained sensor and relay that turns individual light fixtures on or off based on occupancy in the detection zone.
    • It comes with three interchangeable lenses for use in either a 360-degrees high-bay or 360-degrees low-bay general area or an aisle way.
    • The OSFHU provides reliable coverage up to 40 ft. Mounting heights.
    • The OSFHU is also available in a model for cold storage applications with temperatures as low as -40°F. To improve the field-of-view for deep body fixtures, a separate offset adapter accessory (OSFOA-00W) can be used to position the sensor below the fixture body.
    • The adapter simply snaps into a 1/2-inch knockout on the end of the industrial fixture to attach the sensor.

    SPEC SHEET | MORE FILES

  • HB011-PDX

    LEVITON™ PIR Fixture Mount, Dimming Sensor with Daylight Harvesting (120-347V)

    • High Bay Fixture Mount Occupancy Sensor lighting control with Daylight Harvesting– PIR technology.
    • Single relay with one (1-10V sinking current) control line for use to connect directly to low voltage control ballast.
    • Fixture Mount Passive Infrared High /Low Bay Occupancy Sensor, Time Delay: 30 seconds to 30 minutes.
    • Includes Two (2) interchangeable, adjustable 360° lenses: High Bay Lens provides 1.5:1 spacing to mounting height coverage for 21 to 40 feet, and Low Bay Lens provides 2:1 spacing to mounting height coverage for 13 to 20 feet, 120-230-277 or 347V.
    • 1-100% continuous dimming control specifically designed for LED fixture control.
    • Suitable for use in standard and cold storage applications.
    • Visual RGB LED indicators for device status and troubleshooting.
    • Alternating relay software for increased lamp life.
    • Meets energy code requirements for ASHRAE 90.1 and Title 24 for electronic ballast loads 120/277V.

    SPEC SHEET | MORE FILES

  • OSFLA-ITW

    LEVITON™ PIR Fixture Mount Occupancy Sensor with Snap Lock Offset Adapter (120-347V)

    • lncludes an assembly of an OSFLO-W short length snap lock adaptor and an OSFHU-ITW, Quick Snap Connections
    • High-Bay Fixture Mount Occupancy Sensor lighting control, Interchangeable Adjustable 360° Low Bay and (8′-20′), High Bay (20′-40′) Lenses, Aisle Mask, Passive Infrared Technology, 120/208/220/230/240/277/347V; 50/60Hz.
    • Quick-snap threaded nipple, Instant Start-up, Return-to-last state after power outage, Auto-Sensitivity gain from temperature increase, False-detection protection, Super Bright Green LED.
    • The OSFHU high-bay occupancy sensor is specifically designed for high mounted areas such as warehouses, manufacturing and other high ceiling applications.
    • It is a self-contained sensor and relay that turns individual light fixtures on or off based on occupancy in the detection zone.
    • It comes with three interchangeable lenses for use in either a 360-degrees high-bay or 360-degrees low-bay general area or an aisle way.
    • The OSFHU provides reliable coverage up to 40 ft. Mounting heights.
    • The OSFHU is also available in a model for cold storage applications with temperatures as low as -40°F.
    • To improve the field-of-view for deep body fixtures, a separate offset adapter accessory (OSFOA-00W) can be used to position the sensor below the fixture body.
    • The adapter simply snaps into a 1/2-inch knockout on the end of the industrial fixture to attach the sensor.

    SPEC SHEET | MORE FILES

  • HB0LA-PDX

    LEVITON™ PIR Fixture Mount Dimming Sensor with Daylight Harvesting with Snap Lock Offset Adapter (120-347V)

    • Includes an assembly of an OSFLO-W short length snap lock adaptor and an HB011-PDX, High Bay Fixture Mount Occupancy Sensor lighting control with Daylight Harvesting PIR technology, Single relay with one (1-10VDC sinking current) control line for use to connect directly to low voltage control ballast.
    • Fixture Mount Passive Infrared High/Low Bay Occupancy Sensor, Time Delay: 30s-30m, (2) interchangeable, adjustable 360° lenses, the high bay PIR lens provides 1.5:1 spacing to mounting height coverage for 21-40 ft, the low bay lens provides 2:1 spacing to mounting height coverage for 13-20 ft, 120-230-277 or 347VAC
    • 1-100% continuous dimming control specifically designed for LED fixture control.
    • Suitable for use in standard and cold storage applications.
    • Visual RGB LED indicators for device status and troubleshooting.
    • Alternating relay software for increased lamp life.
    • Meets energy code requirements for ASHRAE 90.1 and Title 24 for electronic ballast loads 120/277V

    SPEC SHEET | MORE FILES

  • OSFLO-W

    LEVITON™ Snap-Lock Offset Adapter For OSHFU Sensor

    • Short length offset adapter for use with OSFHU occupancy sensors.
    • To improve the field-of-view for deep body fixtures, a separate offset adapter accessory (OSFOA-00W) can be used to position the sensor below the fixture body.

Main Menu