EnOcean EasyFit

8Products found
  • LEDRU

    EnOcean EasyFit™ Wireless LED Relay Zone Controller with 0-10V Dimming Capability, 902 MHz Frequency

    • The LED relay zone LEDRU controller uses wireless technology to communicate with other self-powered EnOcean based products and provides an amazingly simple solution for dimming control of LED lighting.
    • The compact size enables flexible installation inside of or next to electrical boxes and fixtures so it can be easily wired out of sight using standard wiring practices.
    • Simply link the module to an EnOcean-based motion sensor, light sensor, switch or rocker pad and experience levels of efficiency and convenience that can only be achieved through wireless controls.
    • LEDRU provides an interface for wired external Occupancy sensor – 12V DC Auxiliary and Sensor I/O.
    • Includes surge protection exceeding IEC61000-4-5 installation class 4.
    • LEDRU is supported by Navigan Wireless Commisioner NWC 300U and Navigan Software.
    • With Navigan Wireless Commissioner you can simplify installation of building automation projects using EnOcean’s energy harvesting technology, and easily configure EnOcean controllers.
    • Proprietary 902 MHz EnOcean Frequency

    SPEC SHEET | MORE FILES

  • LEDDU

    EnOcean EasyFit™ Wireless LED Zone Controller 0-10V without Relay - 12V Aux Input, 902 MHz Frequency

    • The LED controller LEDDU uses wireless technology to communicate with other self-powered EnOcean-based products and provides an amazingly simple solution for dimming control of LED lighting.
    • It is directly supplied from the auxiliary 12V supply output of a connected LED driver.
    • The compact size enables flexible installation inside of or next to electrical boxes and fixtures so it can be easily wired out of sight using standard wiring practices.
    • It is also possible to link the LED controller to a central controller or via a gateway to building automation systems like BACnet.
    • LEDDU is supported by Navigan Wireless Commisioner NWC 300U and Navigan Software. With Navigan Wireless Commissioner you can simplify installation of building automation projects using EnOcean’s energy harvesting technology, and easily configure EnOcean controllers.
    • Proprietary 902 MHz EnOcean Frequency

    SPEC SHEET | MORE FILES

  • EOSCU

    EnOcean EasyFit™ Ceiling Mounted Wireless Occupancy Sensor (CR2032 Battery Optional), 902 MHz Frequency

    • The EOSCU Ceiling Mounted Occupancy Sensor is wireless and self-powered making them one of the most cost effective ways to control energy-use in unoccupied rooms
    • It harvests solar energy from indoor light and uses radio frequency technology to communicate wirelessly with other EnOcean-enabled devices, setting back temperature and turning off lights and electrical loads when it detects that a space has been unoccupied for a set period of time.
    • The sensor sustains a charge time of 3 hours per 24 hours at 200 lux, and self charges to full in 25 hours at 200 lux.
    • The Ceiling Mounted Occupancy Sensor enables a new level of energy saving control for rooms, hallways and other common areas.
    • The Occupancy sensor uses radio frequency technology to communicate wirelessly with other EnOcean-enabled devices to set back temperature and turn off lights and electrical loads when a space has been unoccupied for a set period of time. Because the sensors are wireless there is no need to run additional wiring and installation can be completed in a matter of minutes.
    • The sensor is self-powered by harvesting energy from indoor light, eliminating the need for periodic battery changes.
    • Interoperable. Communicates wirelessly with other devices using the EnOcean wireless standard.
    • Self-powered. Two integrated solar cells enable indoor light energy harvesting to power the device and eliminate the need for wires or batteries.
    • PIR motion sensor with 360 degree viewing angle lens for maximum efficiency in different room settings.
    • Two molded buttons with LED indicator lights can be used to link and configure the device.
    • Internal tray accommodates supplemental coin cell battery for use in low light environments.
    • Proprietary 902 MHz EnOcean Frequency

    SPEC SHEET | MORE FILES

  • EOSWU

    EnOcean EasyFit™ Wall Mounted Wireless Occupancy Sensor (CR2032 Battery Optional), 902 MHz Frequency

    • The EOSWU Wall-Mounted Occupancy Sensor is wireless and self-powered making it one of the most cost- effective ways to control energy-use in unoccupied rooms.
    • They can be installed in minutes because there are no additional wires to run and they require no batteries so on-going maintenance costs are eliminated.
    • It solar energy from indoor light and uses radio frequency technology to communicate wirelessly with other EnOcean-enabled devices, setting back temperature and turning off lights and electrical loads when it detects that a space has been unoccupied for a set period of time.
    • The sensor sustains a charge time of 3 hours per 24 hours at 200 lux, and self charges to full in 25 hours at 200 lux.
    • Communicates wirelessly with other devices using the EnOcean wireless standard.
    • Self-powered. Integrated solar cell harvests indoor light to power the device and eliminates the need for wires or batteries.
    • PIR motion sensor with both wide angle and long range options for maximum efficiency and flexibility in different rooms.
    • Two molded buttons with LED indicator lights can be used to link and configure the EOSWU.
    • Internal tray accommodates supplemental coin cell battery for use in low light.
    • Proprietary 902 MHz EnOcean Frequency

    SPEC SHEET | MORE FILES

  • ELLSU

    EnOcean EasyFit™ Ceiling Mounted Wireless Light Level Sensor (Daylight Harvesting Module), 902 MHz Frequency

    • The ELLSU EnOcean Light Level Sensor measures and reports the level of available natural light.
    • Used in conjunction with suitable controllers such as EnOcean LEDRU and LEDDU, it enables implementation of energy saving daylight harvesting control systems.
    • Daylight harvesting is a great way to save energy and cost while enhancing worker satisfaction by allowing personal control of light levels.
    • Lighting control systems employing this technique measure natural light available in a building and only add as much artificial light as necessary.
    • EnOcean Light Level Sensor uses a solar cell for Solar Energy Harvesting to measure the amount of available natural light and to generate the required energy for its operation.
    • Natural light level is measured every minute and significant changes (> 50 lux) are transmitted immediately.
    • In addition, a heartbeat message containing the current light level is transmitted at random intervals between 20 to 30 minutes.
    • EnOcean Light Level Sensor is interoperable with other devices using the EnOcean Wireless Standard.
    • EnOcean Light Level Sensor can be quickly deployed without wiring and is maintenance free thanks to the ability to harvest the energy required for operation.
    • EnOcean Light Level Sensor is optimized for operation together with the EnOcean LED Controllers LEDDU and LEDRU.
    • Proprietary 902 MHz EnOcean Frequency

    SPEC SHEET | MORE FILES

  • ESRPU

    EnOcean EasyFit™ Single-Rocker Pad for Self-Powered Wireless Switch, 902 MHz Frequency

    • Self-powered wireless controls are simple to install. The ESRPU Single Rocker Pads use EnOcean energy harvesting technology to communicate wirelessly with other wireless devices and provide convenient control of lighting, temperature and miscellaneous electric loads.
    • The rocker pads are self-powered and never require batteries because the simple act of pressing the rocker generates enough energy to send a wireless signal to other EnOcean-based devices.
    • Use them in conjunction with sensors and controls to maximize efficiency and provide a level of comfort and convenience you cannot achieve with traditional switches.
    • Communicates wirelessly with other devices using the EnOcean wireless standard.
    • Self-powered. Integrated kinetic harvester provides the energy to power the device and eliminates the need for wires.
    • No additional wire to run so installation is fast and easy. Install them where you want them and then move them anytime.
    • Decorator style rocker pads capable of performing switching and dimming.
    • Proprietary 902 MHz EnOcean Frequency

    SPEC SHEET | MORE FILES

  • EDRPU

    EnOcean EasyFit™ Double-Rocker Pad for Self-Powered Wireless Switch, 902 MHz Frequency

    • Self-powered wireless controls are simple to install.
    • EDRPU Double Rocker Pads use EnOcean energy harvesting technology to communicate wirelessly with other wireless devices and provide convenient control of lighting, temperature and miscellaneous electric loads.
    • The rocker pads are self-powered and never require batteries because the simple act of pressing the rocker generates enough energy to send a wireless signal to other EnOcean-based devices.
    • Use them in conjunction with sensors and controls to maximize efficiency and provide a level of comfort and convenience you cannot achieve with traditional switches.
    • Communicates wirelessly with other devices using the EnOcean wireless standard.
    • Self-powered. Integrated kinetic harvester provides the energy to power the device and eliminates the need for wires.
    • No additional wire to run so installation is fast and easy. Install them where you want them and then move them anytime.
    • Decorator style rocker pads capable of performing switching and dimming.
    • Proprietary 902 MHz EnOcean Frequency

    SPEC SHEET | MORE FILES

  • NWC 300U

    EnOcean EasyFit™ Navigan™ Wireless Commissioner

    • With Navigan Wireless Commissioner you can simplify installation of building automation projects using EnOcean’s energy harvesting technology, and easily configure EnOcean controllers.
    • It can be used to define link tables, change parameters and settings, and to edit and store projects.
    • The NWC 300U supports the LEDRU and LEDDU.
    • The software is available to download for free.
    • Proprietary 902 MHz EnOcean Frequency

    SPEC SHEET | MORE FILES

Main Menu